Ford
Racing Parts
Top
3.55 Ring & Pinion
M-4209-G355
$135.00
3.73 Ring & Pinion
M-4209-F373N
$145.00
4.10 Ring & Pinion
M-4209-G410- ISF Treated
$225.00
4.30 Ring & Pinion
M-4209-G430
$185.00
4.56 Ring & Pinion
M-4209-G456
$215.00
Install Kit
Includes everything that
M-4210-A has and pinion gear and carrier bearings
Use for changing ring and
pinion gear or differential
M-4210-B
$89.00
Install Kit
Includes everything that
M-4210-B has and axle shaft bearings and axle shaft seals
Use for changing ring and
pinion gear or differential
M-4210-C
$109.00
ISF
Treated Gear Kits
Top
INCLUDIES:
M-4209-G4XX-ISF
M-4210-C
M-4033-G*
2004 and earlier Mustang
ISF 4.10 Ring & Pinion M-4209-G410-ISF
M-4210-C
Install Kit
M-4033-G1 Axle Girdle
$525.00
2005 - Later Mustang
ISF 4.10 Ring & Pinion M-4209-G410-ISF
M-4210-C
Install Kit
M-4033-G2 Axle Girdle
$525.00
Top
Axle Girdle
Lightweight 356T aluminum
casting replaces rear cover
Provides additional support for
differential bearing caps
Increases ring and pinion
gear life
M-4033-G1
$179.00
Top
FRICTION MODIFIER FOR CLUTCH-TYPE
LIMITED-SLIP DIFFERENTIALS
Specially formulated additive to
provide smooth operation of clutch-type limited-slip differentials.
M-19546-A1
$4.00
Top
8.8" - 31 Spline - Trac Lok Differential
Traction-Lok limited-slip
differential
Features plate-type clutches
M-4204-F318
$250.00
Top
8.8" - 31 Spline - Open Differential
Will accept anti-lock
exciter ring
M-4204-F3180
$170.00
Top
7.5" TRACTION-LOK LIMITED SLIP DIFFERENTIAL
7.5" differential
Fits 28 spline axles
Features plate-type clutches
Will accept anti-lock exciter ring ,
Requires 4 ounces of CM-19546-A1 friction modifier
with initial fill
M-4204-C75
$179.20
Top
ROLLER PILOT BEARING
Production roller pilot bearing fits 4.6L modular
engines
NOTE:
Pre-greased – do not add extra grease. Clutch and bearing damage may
occur
M-7600-B
$8.44
Top
HD Throwout Bearing
Fits 1979-2004 Mustangs with manual transmission
and V-8 engine
Self-centering bearing design
Heavy duty design lasts longer than
most aftermarket bearings
M-7548-A
$28.75
Top
Double Hump Transmission Crossmember
simplifies installation of dual
exhaust systems
on “Fox” vehicles
M-5059-A
$61.00
Top
Manual Trans Flywheel - Billet Steel 28 oz
Pre-1981 302 engines and 351 engines using 157T
flywheels. Meets SFI 1.1.
M-6375-A302
$245.00
Top
Cast Iron 5.0L Flywheel 86-95 Mustang
1981 and later 302 engines. Exact replacement for
1986-95 Mustang stock unit .
M-6375-B302
$95.00
Top
5.0L Auto Transmission Flywheel - 50 oz
Fits 1981-01 5.0L with small bellhousing C-4 trans.
13-1/4" diameter/10-1/2" bolt circle.
M-6375-E302
$130.00
Top
5.0L / 5.8L Auto Trans Flywheel - 28 oz
Fits 289/302/351W,C,M with large bellhousing C-4 trans. and AOD.
M-6375-G302
$58.00
Top
Pressure Plate Bolt and Dowel Kit
Use with Ford Racing flywheels to
align and attach the 10.5" diaphragm-style clutch pressure plate to
the flywheel
This kit includes three dowel pins that are necessary to align and
stiffen the pressure plate shell. NOTE: If these dowels are not used
the clutch may chatter
This kit includes six 8mm bolts with integral lock washers. NOTE:
Ford Racing and production flywheels have metric bolt holes for
diaphragm style clutches. Ford Racing billet steel flywheels also
have 5/16"-18 SAE bolt holes for “long” style clutches.
M-6397-A302
$13.00
Top
Heavy Duty Mustang 10.5" Clutch Kit
Consists of M-7550-A302 disc,
M-7563-A302 pressure plate and D9ZZ-7548-A throwout bearing.
Click here to view the parts instruction sheet.
M-7560-A302N
$205.00
Top
HD King Cobra Mustang 10.5" Clutch Kit
Consists of M-7550-A302N disc,
M-7563-C302N pressure plate and D9ZZ-7548-A throwout bearing.
Click here to view the parts instruction sheet.
M-7560-C302N
$210.00
Top
Trac-Lok Rebuild Kit
Kit includes
clutch pack, shims, friction modifier and
instruction sheet
Fits all 8.8'' Traction-Lok
differentials
M-4700-B
$74.00
Top
5.0 Aluminum Driveshaft
Fits 79-95
Mustang/Capri 5.0L with T-5/SROD/C-4/A0D, 1979-93 with
Tremec and 7.5'' or 8.8'' axles
M-4602-G
$259.00
Top
4.6 Aluminum Driveshaft
Fits 96-04
Mustang and 1996-98 Cobra 4.6L with manual transmission
M-4602-J
$259.00
Top
Steel Bearing Retainer
Replacement T-5 bearing
retainer with steel throw-out bearing sleeve
Fits production and Ford
Racing T-5 transmissions
M-7050-A
$37.00
Top
E4OD / 4R100 Aluminum Transmission Pan
Cast aluminum transmission
pan with cooling fins and Ford Racing logo cast in the bottom
Pan holds approximately
2-quarts additional ATF
Kit includes mounting
hardware. Filter and pan gasket not included
M-7195-T
$200.00