This page is devoted
to items that could be categorized as "Air and Fuel Delivery" items such as
intake manifolds, throttle body assemblies and other related items
1" thick for clearance with
M-6582-E302
Valve Covers
New and improved quality, made-in-the-U.S.A. CNC machined from
Westinghouse Type C phenolic material fits between the upper and lower
manifolds to help dissipate heat and significantly increase performance.
Includes longer bolts.
2003-04 MUSTANG COBRA
UPGRADED FORD WHIPPLE SUPERCHARGER KIT
DESIGNED FOR USE WITH
FACTORY TWIN BORE THROTTLE BODY!!!
Kit includes
supercharger, supercharger inlet, manifold adapter plate and hardware
kit
Does not
require PCM, fuel pump or MAF meter upgrades
Simple bolt on
increase at the rear wheels of 85 horsepower and 50 ft./lbs. of torque
Installation of this kit will void your new vehicle engine warranty
With a multitude of different kits available, the most popular are
the 810000 (basic starter kit with 50, 90, 125, and 150 HP jets), the
810500 (dual stage system with 50, 90, and 125 HP jetting per stage
yielding a total of 250 HP) and the 810502 (dual stage upgrade with
requires the 810000 basic kit). The dual stage kit and upgrade kit
require larger fuel pumps. Performance tests have shown up to a 2 second
reduction in elapsed time on a stock 5.0 Mustang using just 125 HP jets
on the single stage 810000 system. Part # 810010 4.6 Mustang is available
with jetting from 50, 90, and 125 only. Please note this kit is not
upgradeable due to the engine specifications
Key Benefits
This kit
can be upgraded to a dual stage system.
17' of
braided steel hose is included in the kit.
Lifetime
warranty and qualified tech help when you need it most.
One of the simplest ways to gain 2 - 7 RWHP on your 96-04 4.6 Mustang is
the intake spacer from Steeda Auto Sports. This easy to install and cost
effective piece works, we dyno tested it on both naturally aspirated and
super charged cars! We gained 2 - 3 RWHP on naturally aspirated cars and
4 - 7 RWHP on super charged cars. The high quality CNC machined
piece comes complete with gasket and hardware
These Steeda
Supercharger Pulleys are made from Steel not aluminum and have holes
drilled around the center of the pulley to lower the rotational weight.
This is the highest quality pulley available for the 2003 & 2004 Cobra.
2.81" pulley 4-5psi over stock, requires DiabloSport Predator Hand Held
Tuner & shorter belt. Testing has shown gains of 60+ horsepower.
Steeda's Cobra Blower
Belt Tensioner creates more belt wrap around blower pulley for less belt
slip with smaller pulleys and higher boost applications. Comes with a
100MM billet aluminum pulley, all hardware and bracket to mount to
engine.
